Category products

Concentric Cross pipe fittings are a type of fitting used in piping systems where four pipe sections meet at a common point. Specifically, the stainless steel concentric cross is designed with equal-sized openings and ensures a symmetrical, evenly distributed connection…

🔝 Why do stainless steel materials also rust❓ Stainless steel is designed to be resistant to rust due to its chromium content, which forms a passive oxide layer that protects the underlying metal. However, it can still rust under certain…

Solid solution stainless steel pipe fittings are designed to enhance the mechanical properties of the steel, such as strength, toughness, and corrosion resistance. The key functions include: Strengthening: The solid solution process involves dissolving alloying elements (like nickel, molybdenum, or…

The specific steps for using dye penetrant inspection (DPI) on flanges: ✅ Preparation ✔ Clean the Surface: Ensure the flange surface is clean and free from contaminants like grease, oil, dirt, or rust. Use a suitable cleaner or solvent to…

The ANSI / ASME B16.9 standard covers factory-made wrought steel buttwelding fittings, including 180-degree elbows. These elbows are used to change the direction of piping in a system by 180 degrees, creating a U-bend. Here’s a summary of what you…

A Stainless Steel 90-Degree Elbow Butt Weld Fitting is a type of pipe fitting used to connect two pipes at a right angle (90 degrees) in a piping system. These fittings are typically made from stainless steel, which offers excellent…

An industrial 45° elbow refers to a pipe fitting used in plumbing and piping systems. It allows for a change in direction of the piping by 45 degrees. This type of elbow is commonly used in various industries such as…

A blind flange is a solid disk used to block off a pipeline or to create a stop. It’s designed to have no opening or connection, allowing it to seal off sections of piping systems. Blind flanges are typically used…

A lap joint flange is a type of flange used in piping systems to connect pipes, valves, pumps, and other equipment. It consists of two main components: a stub end and a backing flange. The stub end is welded to…

Threaded flanges are a type of flange that have threads on the inner bore, allowing them to be connected to pipes or fittings with matching threads. They are commonly used in piping systems where welding is either not feasible or…